Plaster / Stucco One-Coat Stucco EIFS Direct Applied Vents Ultra Lath ® Drywall Parts & Pieces Gutter & Siding
   
 Join us on Facebook: Facebook
ULTRA-LATH® PLUS
Drip Edge
Sealant & Caulk
Custom Products
Z Flashing
IN-BOX
ULTRA-LATH®
Corner Beads
Vents
ULTRA-TRAC® Intersections
Slip Joint/Expansion Joint
Screeds
ULTRA-TRAC® Reveal System
Control Joints
Casing Beads

Narrow Flange Casing Bead

Application
Use around openings or where stucco terminates at a dissimilar surface. Allows stucco to maintain a straight line.

Specification
Narrow Flange Casing Bead shall be Plastic Components, Inc. #________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF Data SheetDownload Data Sheet Download CAD Drawing in PDF format Download PDF Format CAD Download CAD DrawingDownload CAD Drawing (FRAME) Download CAD Drawing in PDF format Download PDF Format CAD (FRAME) Download CAD DrawingDownload CAD Drawing (MASONRY) Download CAD Drawing in PDF format Download PDF Format CAD (MASONRY)

1038X3/8" (10 mm)Narrow flange casing bead, 1-1/4" (32 mm) perforated flange. 75
1050X1/2" (13 mm)75
1075X3/4" (19 mm)75
1078X7/8" (22 mm)75
10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example: 1050XWP

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Arched Casing Bead

Application
For use in any area where an arched detail has been specified. This stucco casing bead can be converted into an arched casing bead by simply cutting the pre-slotted flange.

Specification
Arched Casing Bead shall be Plastic Components, Inc. #________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF InstructionsDownload Installation Instructions Download PDF Data SheetDownload Data Sheet

1025A1/4" (6 mm)Arched casing bead, 1-3/4" (44 mm) perforated flange.75
1038A3/8" (10 mm)75
1050A1/2" (13 mm)75
1058A5/8" (16 mm)75
1075A3/4" (19 mm)75
1078A7/8" (22 mm)75
1100-0-A1" (25 mm)50
1125-0-A1-1/4" (32 mm)50
1150-0-A1-1/2" (38 mm)50
10' (3 m) lengths

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

T Bar Casing Bead

Application
To be used in any area where a banding/pop out or "quoin" detail is desired. "T" bar design adds strength and will reduce "waving" with the extra thickness of the stucco.

Specification
Casing Beads shall be Plastic Components, Inc. #________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF Data SheetDownload Data Sheet Download CAD DrawingDownload CAD Drawing (FRAME) Download CAD Drawing in PDF format Download PDF Format CAD (FRAME) Download CAD DrawingDownload CAD Drawing (MASONRY) Download CAD Drawing in PDF format Download PDF Format CAD (MASONRY)

11001" (25 mm)"T" bar casing bead, 1-3/4" (44 mm) wide perforated flange.
Designed for extra strength.
50
11251-1/4" (32 mm)50
11501-1/2" (38 mm)50
12002" (51 mm)40
10' (3 m) lengths

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Old Style Casing Bead

Application
Engineered for use at any area where thicker amounts of stucco are specified, eg: "quoins", bands, or popouts.

Specification
Old Style Casing Bead shall be Plastic Components, Inc. #________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 

Click To Enlarge
Download PDF Data SheetDownload Data Sheet Download CAD DrawingDownload CAD Drawing (FRAME) Download CAD Drawing in PDF format Download PDF Format CAD (FRAME) Download CAD DrawingDownload CAD Drawing (MASONRY) Download CAD Drawing in PDF format Download PDF Format CAD (MASONRY)

1100-O1" (25 mm)"O" casing bead, 1-3/4" (44 mm) wide perforated flange.50
1125-O1-1/4" (32 mm)50
1150-O1-1/2" (38 mm)50
1200-O2" (51 mm)40
10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example: 1100-OWP

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Unpunched Casing Bead with 3.5" Wide Flange

Application
To be used in areas where stucco terminates at foundations, windows, doors, or any other termination point. Will not rust or dent.

Specification
Wide Flange Casing Bead shall be Plastic Components, Inc. #________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF InstructionsDownload Installation Instructions Download PDF Data SheetDownload Data Sheet

35383/8" (10 mm)3-1/2" (89 mm) wide nailing flange non-punched.40
35501/2" (13 mm)40
35585/8" (16 mm)40
35753/4" (19 mm)40
35787/8" (22 mm)40
10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example: 3538WP

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Medium Flange Casing Bead

Application
Use where an medium flange is required at a termination point.

Specification
Medium Flange Casing Bead shall be Plastic Components, Inc. #________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF Data SheetDownload Data Sheet

WF10501/2" (13 mm)Medium flange casing bead, 2-1/4" (57 mm) perforated flange.75
WF10585/8" (16 mm)75
WF10753/4" (19 mm)75
WF10787/8" (22 mm)75
10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example: WF1050WP

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Critter Control™ Casing Bead

Application
Designed to terminate stucco at the base of a wall – serves as a cap for 1/2" (13 mm) or 5/8" (16 mm) sheathing. Weep holes in the ground drain moisture away from the base of the wall.

Specification
Critter Control™ Casing Bead shall be Plastic Components Inc. #105058WP series. All exterior accessories shall be PVC material conforming to ASTM standards D1784, C926, C1063 and D4216. They shall be used where specified by an architect and installed per industry standards.

 

Click To Enlarge
Download PDF Spec SheetDownload Spec Sheet Download PDF Data SheetDownload Data Sheet

105850WP1/2" (13 mm)5/8" (16 mm) weeped ground50
107850WP1/2" (13 mm)7/8" (22 mm) weeped ground50
105858WP5/8" (16 mm)5/8" (16 mm) weeped ground50
107858WP5/8" (16 mm)7/8" (22 mm) weeped ground50
10' (3 m) Lengths

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Window/Door Casing Bead

Application
Creates a decorative reveal at the termination point of window and door openings.

Specification
Window/Door Casing Bead shall be Plastic Components Inc. #105875 series. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C926, C1063 and D4216. They shall be used where specified by an architect and installed per industry standards.

 

Click To Enlarge
Download PDF Spec SheetDownload Spec Sheet Download PDF Data SheetDownload Data Sheet

1058-505/8" (16 mm) Window/Door Casing Bead1/2" (13 mm)50
1058-585/8" (16 mm)5/8" (16 mm)50
1058-755/8" (16 mm)3/4" (19 mm)50
1058-785/8" (16 mm)7/8" (22 mm)50
1078-507/8" (22 mm)1/2" (13 mm)50
1078-587/8" (22 mm)5/8" (16 mm)50
10' (3 m) Lengths

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Casing Bead w/5" Flange

Application
Use where a 5" flange is required at the termination point at a roof line. Flange is striated to assist in bonding.

Specification
Casing Bead with 5" Flange shall be Plastic Components, Inc. #______. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the architect and installed per industry standards.

 

Click To Enlarge
Download PDF Data SheetDownload Data Sheet

1050XL1/2" (13 mm)Casing bead with 5" (127 mm) perforated flange.40
1058XL5/8" (16 mm)40
1075XL3/4" (19 mm)40
1078XL7/8" (22 mm)40
10' (3 m) lengths

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Beveled Angle Casing Bead

Application
For use where stucco and plaster terminate at windows, doors or other dissimilar materials. The Beveled Angle Casing Bead provides a gradual transition to allow moisture to drain away from the structure. Exterior angle of bead should not be covered with plaster or stucco.

Specification
Beveled Angle Casing Bead shall be Plastic Components Inc. #______. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the architect and installed per industry standards

 
Download PDF Data SheetDownload Data Sheet

1050BA1/2" (13 mm)2" (51 mm) width perforated flange. Allows moisture to move away from the structure via its beveled angle.75
1058BA5/8" (16 mm)75
1075BA3/4" (19 mm)75
1078BA7/8" (22 mm)75
1100BA1" (25 mm) 50
1150BA1-1/2" (38 mm)50
1200BA2" (51 mm)50


All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Channel Casing Bead

Application
Channel casing bead is designed for quicker, better quality installations. Faster, straighter, more consistent than gluing two separate beads together.

Specification
Channel casing bead shall be Plastic Components Inc #________. All exterior trim shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the Architect and installed per industry standards.

 
Download PDF Data SheetDownload Data Sheet

1200100-CCB2" (51 mm)Channel casing bead designed for quicker, better quality installation. Faster, straighter, more consistent than butting two separate beads together. 1" (25 mm)15
1200150-CCB2" (51 mm)1-1/2" (38 mm)15
1200200-CCB2" (51 mm)2" (51 mm)15
1150250-CCB1-1/2" (38 mm)2-1/2" (64 mm)15
10' (3 m) Lengths

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.

Standard Flange Casing Bead

Application
Use at areas where stucco terminates at foundations, windows, doors or any other termination point. Will not rust or dent.

Specification
Standard Flange Casing Bead shall be Plastic Components Inc. #________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF Data SheetDownload Data Sheet Download CAD DrawingDownload CAD Drawing (FRAME) Download CAD Drawing in PDF format Download PDF Format CAD (FRAME) Download CAD DrawingDownload CAD Drawing (MASONRY) Download CAD Drawing in PDF format Download PDF Format CAD (MASONRY)

10251/4" (6 mm)Standard flange casing bead, 1-3/4" (44 mm) perforated flange.75
10383/8" (10 mm)75
10501/2" (13 mm)75
10585/8" (16 mm)75
10753/4" (19 mm)75
10787/8" (22 mm)75
10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example: 1050WP

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.
 
Home | About The Company | What's New | Technical Data | Installation Instructions | Sales Representatives | Contact Us
Plaster/Stucco | One-Coat Stucco | Drywall | EIFS | Direct Applied | ULTRA-LATH® | Parts & Pieces | Gutter & Siding | Related Items
Industry Links