Plaster / Stucco One-Coat Stucco EIFS Direct Applied Vents Ultra Lath ® Drywall Parts & Pieces Gutter & Siding
   
 Join us on Facebook: Facebook
ULTRA-LATH®
Control Joints
ULTRA-TRAC® Reveal System
Screeds
Slip Joint/Expansion Joint
ULTRA-TRAC® Intersections
Casing Beads
Corner Beads
Lap Siding Step Bead
IN-BOX
Z Flashing
Custom Products
Sealant & Caulk
Drip Edge
ULTRA-LATH® PLUS
Vents

Continuous Soffit Vent – 2-3/8", 3", 4" and 6" vents

Application
Low cost and simple solution to venting soffit areas. Vent holes 1/8" (3 mm) diameter. Wide nailing flange makes installation easier. Will not rust or corrode. Excellent paint adhesion. "Eyebrow" assures excellent keying of stucco to the leg. Connector clip included.

Specification
Soffit Vent shall be Plastic Components Inc. #_________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF InstructionsDownload Installation Instructions Download PDF Data SheetDownload Data Sheet

549-501/2" (13 mm)Soffit vent - 2-3/8" (60 mm) vented area. 15 sq. in. (9,678 sq. mm)
of free air flow per linear ft.
13
549-585/8" (16 mm)13
549-753/4" (19 mm)13
549-787/8" (22 mm)13
3549-501/2" (13 mm)Soffit vent - 3" (76 mm) vented area. 15 sq. in. (9,678 sq. mm)
of free air flow per linear ft.
13
3549-585/8" (16 mm)13
3549-753/4" (19 mm)13
3549-787/8" (22 mm)13
4549-501/2" (13 mm)Soffit vent - 4" (102 mm) vented area. 16 sq. in. (10,323 sq. mm)
of free air flow per linear ft.
13
4549-753/4" (19 mm)13
4549-787/8" (22 mm)13
6549-501/2" (13 mm)Soffit vent - 6" (152 mm) vented area. 18 sq. in. (11,614 sq. mm)
of free air flow per linear ft.
10
6549-753/4" (19 mm)10
10' (3 m) lengths • Connector clips included

It is recommended that PVC products be used for all exterior exposures.

Continuous Soffit Vent for Soffit Applications – 1-3/4", 2-5/8", 3", 4" and 6" vents

Application
Used on soffits where 3/8" (10 mm) sheathing is being used. Vent holes are 1/8" (3 mm) diameter. Excellent paint adhesion. Connector clips included. Will not rust or corrode.

Specification
Soffit Vent shall be Plastic Components Inc. #_________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF InstructionsDownload Installation Instructions Download PDF Data SheetDownload Data Sheet

3003/8" (10 mm)2-5/8" (67 mm) vent area. 15 sq. in. (9,678 sq. mm) of free air flow per linear ft. 50
3013/8" (10 mm)1-3/4" (44 mm) vent area. 7 sq. in. (4,516 sq. mm) of free air flow per linear ft. 50
33003/8" (10 mm)3" (76 mm) vent area. 15 sq. in. (9,678 sq. mm) of free air flow per linear ft.35
43003/8" (10 mm)4" (100 mm) vent area. 16 sq. in. (10,323 sq. mm) of free air flow per linear ft.35
63003/8" (10 mm)6" (152 mm) vent area. 20 sq. in. (12,904 sq. mm) of free air flow per linear ft.30
10' (3 m) lengths

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.

3-Piece Continuous Soffit Vent – 1-3/4", 2-5/8", 3", 4" and 6" vents

Application
This product consists of three parts; two stucco stops and a removable vent. The vent can be removed before stucco is applied, keeping the vent clean and eliminating the need for masking. Vent holes are 1/8" (3 mm) diameter. Connector clips included.

Specification
Three-Piece Soffit Vent shall be Plastic Components Inc. #_________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 

Click To Enlarge

Click To Enlarge

Click To Enlarge

Click To Enlarge
Download PDF Data SheetDownload Data Sheet

550-383/8" (10 mm)Three part soffit vent with removable 2-5/8" (67 mm) vent.
1-3/4" (44 mm) vent may be substituted. Up to
15 sq. in. (9,678. sq. mm) of free air flow per linear ft.
15
550-501/2" (13 mm)13
550-585/8" (16 mm)11
550-753/4" (19 mm)11
550-787/8" (22 mm)11
4550-383/8" (10 mm)Three part soffit vent with 4" (102 mm) vent.
3" (76 mm) vent may be substituted. Up to
16 sq. in. (10,323 sq. mm) of free air flow per linear ft.
15
4550-501/2" (13 mm)13
4550-585/8" (16 mm)11
4550-753/4" (19 mm)11
4550-787/8" (22 mm)11
6550-383/8" (10 mm)Three part soffit vent with 6" (152 mm) vent.
20 sq. in. (12,904 sq. mm) of free air flow per linear ft.
11
6550-501/2" (13 mm)11
6550-585/8" (16 mm)11
6550-753/4" (19 mm)11
6550-787/8" (22 mm)11
10' (3 m) lengths • Product ships unassembled • Connector Clips Included

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.

2-Piece Continuous Soffit Vent – 2-3/8", 3" and 4" vents

Application
Low cost, simple solution when a soffit vent terminates at either the fascia board or vertical wall. Simply attach the vertical "F" clip to vertical plane and insert the soffit vent into the "F" clip.Vent hole size 1/8" (3 mm) diameter.

Specification
Soffit Vent shall be Plastic Components Inc. #_________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF InstructionsDownload Installation Instructions Download PDF Data SheetDownload Data Sheet

F549-50 WF5511/2" (13 mm)Soffit Vent - 2-3/8" (60 mm) vented area. 15 sq. in. (9,678 sq. mm)
of free air flow per linear ft.
13
F549-58 WF5515/8" (16 mm)13
F549-75 WF5513/4" (19 mm)13
F549-78 WF5517/8" (22 mm)13
F3549-50 WF5511/2" (13 mm)Soffit Vent - 3" (76 mm) vented area. 15 sq. in. (9,678 sq. mm)
of free air flow per linear ft.
13
F3549-58 WF5515/8" (16 mm)13
F3549-75 WF5513/4" (19 mm)13
F3549-78 WF5517/8" (22 mm)13
F4549-50 WF5511/2" (13 mm)Soffit vent - 4" (102 mm) vented area. 16 sq. in. (10,323 sq. mm)
of free air flow per linear ft.
13
F4549-75 WF5513/4" (19 mm)13
F4549-78 WF5517/8" (22 mm)13
10' (3 m) lengths • Product ships unassembled • Connector Clips Included

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.

3-Piece Continuous Soffit Vent with 90º Leg

Application
Acts as a vented bridge between a horizontal and vertical wall junction. The stucco stop is placed on the horizontal soffit side and the angled 90º leg returns up the vertical wall. Comes standard with a 2-5/8" (67 mm) wide vent with 1/8" (3 mm) vent holes; 1-3/4", 3", 4", or 6" (44 mm, 76mm, 102 mm, or 152 mm) vent may be substituted upon request. Connector clips included.

Specification
Soffit Vent with 90º Leg shall be Plastic Components Inc. #_________. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF Data SheetDownload Data Sheet

551-501/2" (13 mm)Three part soffit vent with 90º leg. Standard 2-5/8" (67 mm)
vent included. 1-3/4", 3", 4" or 6" (44, 76, 102 or 152 mm)
vent may be substituted. Up to 15 sq. in. (9,678 sq. mm) of free
air flow per linear ft.
13
551-585/8" (16 mm)13
551-753/4" (19 mm)13
551-787/8" (22 mm)13
10' (3 m) lengths • Product ships unassembled • Connector Clips Included

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.

Clog-free Continuous Soffit Vent for Stucco Soffit

Application
Continuous Soffit Vent with large 1/4" (6 mm) hole configuration that offers excellent air flow and at the same time resists paint clogging. Excellent bond to stucco, also rustproof. Product #549-75-25 has a 1" (25 mm) nailing flange for easier installation.

Specification
Continuous soffit vent shall be Plastic Components Inc. #_____. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF Data SheetDownload Data Sheet

549-75-251" (25 mm)Continuous soffit vent with 1/4" (6 mm) holes. Vent area: 2-3/8" (60 mm)13
10' (3 m) lengths • Connector clips included

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.

Continuous Soffit Vent "F" Series: 2-3/8", 3", 4" and 6" vents

Application
Allows for installation against wall or fascia board areas of soffit. Vent holes 1/8" (3 mm) diameter. Connector clips included. Contact customer service for price, availability and delivery information.

Specification
Soffit Vent shall be Plastic Components Inc. #_____. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the architect and installed per industry standards.

 
Download PDF Data SheetDownload Data Sheet

F549-501/2" (13 mm)Soffit vent – 2-3/8" (60 mm) vent area. 15 sq. in. (9,678 sq. mm) free air flow per linear ft.13
F549-585/8" (16 mm)13
F549-753/4" (19 mm)13
F549-787/8" (22 mm)13
F3549-501/2" (13 mm)Soffit vent – 3" (76 mm) vent area. 15 sq. in. (9,678 sq. mm) free air flow per linear ft.13
F3549-585/8" (16 mm)13
F3549-753/4" (19 mm)13
F3549-787/8" (22 mm)13
F4549-501/2" (13 mm)Soffit vent – 4" (102 mm) vent area. 16 sq. in. (10,323 sq. mm) free air flow per linear ft.13
F4549-753/4" (19 mm)13
F4549-787/8" (22 mm)13
F6549-501/2" (13 mm)Soffit vent – 6" (152 mm) vent area. 18 sq. in. (11,614 sq. mm) free air flow per linear ft.10
F6549-753/4" (19 mm)10
10' (3 m) lengths • Connector clips included

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.
 
Home | About The Company | What's New | Technical Data | Installation Instructions | Sales Representatives | Contact Us
Plaster/Stucco | One-Coat Stucco | Drywall | EIFS | Direct Applied | ULTRA-LATH® | Parts & Pieces | Gutter & Siding | Related Items
Industry Links