Plaster / Stucco One-Coat Stucco EIFS Direct Applied Vents Ultra Lath ® Drywall Parts & Pieces Gutter & Siding
   
 Join us on Facebook: Facebook
ULTRA-LATH®
Control Joints
ULTRA-TRAC® Reveal System
Screeds
Slip Joint/Expansion Joint
ULTRA-TRAC® Intersections
Casing Beads
Corner Beads
Lap Siding Step Bead
IN-BOX
Z Flashing
Custom Products
Sealant & Caulk
Drip Edge
ULTRA-LATH® PLUS
Vents

ULTRA-LATH® Docs

ULTRA-LATH® Flip Book
ULTRA-LATH® Installation Instructions
ULTRA-LATH® Plastic Lath Non-Rusting Alternative
Testimonials
Special Jobs
ULTRA-LATH® FAQ

ULTRA-LATH® Reports

Evaluation Criteria for Lath 2013 - IAPMO
Fenestration Testing Laboratory
Intertek Testing Services
Freeze Thaw Cycling Report

ULTRA-LATH® Plastic Lath: Self-Furred for Hardscapes, Flooring, etc.

Application
For either exterior or interior vertical application; should only be used for non-rated assemblies. The self-furring idles provide exceptional keying and are applied towards the substrate. ULTRA-LATH® is impervious to sand and any harsh chemicals fond in portland based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate. Can not be used in horizontal soffit applications.

Specification
ULTRA-LATH® Plastic Lath shall be Plastic Components, Inc. #_____. It shall be used where specified by the architect and installed per industry standards ASTM C1764. Meets ASTM 330.84 and ASTM 330.84b.

 
Download PDF Spec SheetDownload Spec Sheet Download PDF Data SheetDownload Data Sheet

PDM2796ULTRA-LATH® Plastic Lath sheets - 27" x 96" (686 mm x 2.4 M)10 sheets per bundle/180 sq ft per bundle25 bundles per pallet/ 4,500 sq ft per pallet
We recommend Plastic Components trims for applications using Ultra-Lath.

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.

ULTRA-LATH® Plastic Lath: Self-Furred for Hardscapes, Flooring, etc.

Application
For either exterior or interior vertical application; should only be used for non-rated assemblies. The self-furring idles provide exceptional keying and are applied towards the substrate. ULTRA-LATH® is impervious to sand and any harsh chemicals fond in portland based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate. Can not be used in horizontal soffit applications.

Specification
ULTRA-LATH® Plastic Lath shall be Plastic Components, Inc. #_____. It shall be used where specified by the architect and installed per industry standards ASTM C1764. Meets ASTM 330.84 and ASTM 330.84b.

 
Download PDF Spec SheetDownload Spec Sheet Download PDF Data SheetDownload Data Sheet

PDMRULTRA-LATH® Plastic Lath rolls - 27" x 100' roll (686 mm x 30.5 M)225 sq ft per roll18 rolls per pallet/4,050 sq ft per pallet
We recommend Plastic Components trims for applications using Ultra-Lath.

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.

ULTRA-LATH® Plastic Lath: Self-Furred for Hardscapes, Flooring, etc.

Application
For either exterior or interior vertical application; should only be used for non-rated assemblies. The self-furring idles provide exceptional keying and are applied towards the substrate. ULTRA-LATH® is impervious to sand and any harsh chemicals fond in portland based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate. Can not be used in horizontal soffit applications.

Specification
ULTRA-LATH® Plastic Lath shall be Plastic Components, Inc. #_____. It shall be used where specified by the architect and installed per industry standards ASTM C1764. Meets ASTM 330.84 and ASTM 330.84b.

 
Download PDF Spec SheetDownload Spec Sheet Download PDF Data SheetDownload Data Sheet

PDM3STRIP-LATH strips of plastic lath 3" wide x 96' long (76 mm x 2.4 M)50
PDM4 STRIP LATH strips of plastic lath 4" wide x 96" long (102 mm x 2.4 M)50
PDM6 STRIP LATH strips of plastic lath 6" wide x 96" long (152 mm x 2.4 M)50
PDM8 STRIP LATH strips of plastic lath 8" wide x 96" long (203 mm x 2.4 M)50
We recommend Plastic Components trims for applications using Ultra-Lath.

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.
 
Home | About The Company | What's New | Technical Data | Installation Instructions | Sales Representatives | Contact Us
Plaster/Stucco | One-Coat Stucco | Drywall | EIFS | Direct Applied | ULTRA-LATH® | Parts & Pieces | Gutter & Siding | Related Items
Industry Links