Eliminates the need to wrap corner. Large perforations allow base material to flow through and bond to substrate. Provides a straight, non-rusting and high impact resistant corner.
Corner bead shall be Plastic Components Inc. #4. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.
Caulk all butt joints, intersections and ends.
It is recommended that PVC products be used for all exterior exposures.
Bullnose Veneer Bead
Designed for exterior use. Wide flange has raised shoulder to acept base, mesh and finish coat. Compatible with all finish coatings.
Bullnose Veneer Bead shall be Plastic Components Inc. #________. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.
1" (25 mm) perforated flanges, raised shoulder, one leg slotted.
50
8' & 10' (2.5 & 3 m) lengths
Caulk all butt joints, intersections and ends.
It is recommended that PVC products be used for all exterior exposures.
Arch Corner Bead
Designed with wider, striated flanges for better adhesion. For use where an arch or free flow design is specified. One flange is pre-slotted for perfect arches.
Arch Corner Bead shall be Plastic Components Inc. #2209A. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.
Caulk all butt joints, intersections and ends.
It is recommended that PVC products be used for all exterior exposures.
Corner Bead
Designed with wide flanges to ensure straight and rust-free corners while providing high impact resistant corners. Flange has striations and perforations to ensure a positive bond of the base to the flange and the surface of the sheathing material.
Corner Bead shall be Plastic Components Inc. #2209. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216-99. They shall be used where specified by the architect and installed per industry standards.
Download Data Sheet
Download
CAD Drawing
