What's New

MORE NEW and EXCITING PRODUCTS

Extreme Moisture Starter TRAC™ (SB-EMT series) is the pvc trim to choose for extreme moisture conditions. For use at the base of a wall, this new Starter TRAC has a 3" (76 mm) back flange and sloped front edge to move moisture out and away from the wall assembly. 

Inside Corner Control Joint (2050IC - 2078IC) relieves stress and cracking caused by expansion and contraction in the inside angles of walls and ceilings. 

Clog-free Continuous Soffit Vents (549-75-25 and 300-25) now have large, 1/4" (6 mm) vent hole configurations that offer excellent air flow while resisting pain clogging. Both vents provide 15 sq. in (9678 sq. mm) of free air flow per linear foot, excellent bonding to stucco and are corrosion- and rust-proof. 

Casing Beads w/Back Flanges in two new products:

Critter Control™ Casing Bead (105850WP - 107858WP) is designed to terminate stucco at the base of a wall, while serving as a cap for 1/2" (13 mm) or 5/8" (16 mm) sheathing. 

Window/Door Casing Bead (1058-50 - 1075-100) creates a decorative reveal at the termination point of window and door openings.

New Representative
We have taken on Mr. Jim Gallaway from ABC (Assembled Building Components) as our new representative for Southern California. Jim's contact information can be accessed under the sales representatives tab on this web page, or you can contact him via email at jgallawayabc@aol.com.

NEW Siding Step Bead for stucco over cement block applications
Our patent pending Siding Step Bead (SSB-75-50) is designed to simulate the look of rigid cementitious siding on your building with stucco alone. It features a double ground which functions as a screed between adjoining stucco bands, and a drip edge that improves moisture protection. Great Looks! Easy Installation!

OTHER NEW and EXCITING PRODUCTS
Plastic Components has added to its already extensive product line, the...

Floor Line Control Bead w/ Drip Edge (2078-50, 2078-58)
This trim functions as a horizontal control joint and a moisture control device where two dissimilar materials, such as wood and concrete meet. A typical application would be first floor concrete masonry unit block construction and a wood-framed second floor.

The component allows moisture to migrate down, shedding it away from the wall. Its unique drip edge helps prevent migrating moisture from getting into the V-groove of the control joint, and it keeps it away from the surface area of the first floor wall.

The product details can be found in the Plaster Stucco section or by clicking the product link above.

Low Profile Electrical Boxes for Stucco, EIFS and DEFS

Arlington Industries' IN-BOX for Stucco is now available from Plastic Components! This one-piece electrical box saves labor, and because it installs in the wall, you'll get a great-looking job too! More information can be found by clicking on the above link or visiting the Plaster/Stucco section.

Arlington Industries' IN-BOX electrical box for EIFS and DEFS foam wall systems has the same great features as the IN-BOX for stucco. In addition, it comes with either a fixed or adjustable flange. It can be found in both our EIFS and Direct Applied sections or by clicking on the appropriate link.

Foundation Sill Screed w/ Extended Leg (632-78EL)

Plastic Components' Foundation Sill Screed is used in a similar manner to a weep screed. Installed at the plate line or stem wall, it protects the bottom edge of exterior sheathing when two materials - sheathing and foundation - do not align. Our Foundation Sill Screed provides superior moisture control and protection against moisture penetration and pest infestation.

For additional information, click the link above.

SAVE $$$ . . . . with our ULTRA-LATH® plastic lath!
Rising steel prices and increases in the cost of metal laths are just one more reason to use ULTRA-LATH. In addition to saving material costs, it lowers installed costs.

Other advantages include: rustproof applications, positive keying, resistance to damage from moisture and chemicals, and ease of use and handling. Check it out on the ULTRA-LATH PDF.


 
Home | About The Company | What's New | Technical Data | Installation Instructions | Sales Representatives | Contact Us
Plaster/Stucco | One-Coat Stucco | Drywall | EIFS | Direct Applied | ULTRA-LATH® | Parts & Pieces | Related Items
Industry Links
 

Este pagina en espanol

All Content Copyright © 2007 PlasticComponents.com

Site designed and developed by QuinnCom